RC-3A & B SURFACE MOUNT STYLE
SPECIFY RPS FOR ALL ROOF OPENINGS
CUSTOM FABRICATED... to fit all manufacturers' skylights, power roof exhausters, intake and relief vents, smoke hatches, flues, or job fabricated items,... Provides uniform curb construction, method, and quality, with watertight design... Simple to detail... Convenient to contractors... Minimum architectural supervision... Low known cost.
• WOOD NAILERS...
The sure way of attaching roof felts... eliminating felts from slipping,
sagging or buckling... Helps eliminate vibration hum.
Furnish and install prefabricated roof curbs as manufactured by Roof Products & Systems Corporation at all roof openings as shown on drawings.
Curbs shall be of Box Section Design, 18 gauge galvanized steel with continuous welded corner seams, factory installed wood nailer, and shall be insulated with 1-1/2" thick, 3# density rigid fiberglass board. Standard curb height to be 8" unless otherwise shown on drawings. On concrete or wood decks without insulation use RPS Model RC-3A with built-in cant extended to full mitered corners. Use RPS Model RC-3B if additional field installed exterior insulation is required.
Burglar bars, other heights, roof pitch, liners, and other options shall be furnished where detailed and/or specified in accordance with Roof Products & Systems Corporation details.